I know all of us AutoCAD users, has experienced losing our drawing files when a program system failure unexpectedly came. Or sometimes when a power failure or a software problem happens right in the middle of doing our work. And because it is too sudden, most of the times we haven’t saved our drawings.

So in order to avoid losing much of our work, we tend to use Automatic Save so that even we forgot to save our work, the AutoCAD automatically save it for us, albeit it only saved some of it from the time frame we had set.

Some years ago, when I’m just using the previous version of AutoCAD notably the  AutoCAD 2002 (this version has the most program error I had encounter), when this system error unexpectedly happen and the AutoCAD shutdown unexpectedly. I used to look for my automatically saved drawing (drawing.sv$) on temporary folders using the window explorer.

So now if you are using latest version of AutoCAD, just as I am using the not so latest AutoCAD Architecture 2008. Recovering ou drawing is not that  so complicated anymore. Because AutoCAD now has this command DRAWING RECOVERY.


This command recovered our drawing automatically for us. After a system failure or the AutoCAD program failure unexpectedly came, the Drawing Recovery Windows Manager will open the next time we start AutoCAD session. The Drawing Recovery Windows display the list of all drawing files that were open. However unsaved drawings that are open at the time of an unexpected failure are not tracked by the drawing recevery manager. So it is always safe that we always save our drawing from time to time, even if we had set Automatic Save for file precautions.

If happens that you close the Drawing Recovery Window,  before recovering all files tha you want to recover, you can always access Drawing Recovery command at all times by accessing from the Files pulldown menu, then Drawing Utilities, then Drawing Recovery. Or at the command prompt, type DRAWINGRECOVERY.

Related Posts

Source: PinoyCAD[dot]net | Your Daily dose of AutoCAD Tutorials – Using Drawing Recovery Command
Go to Source: PinoyCAD[dot]net | Your Daily dose of AutoCAD Tutorials