CADcaster

Dimension presentation is vital in a drawing, a drawing plans cannot be use if the dimension is not readable. Thats why it is important for us AutoCAD Drafters and Architects that we assure that, the dimensions are shown in a nice and in a readable way. But sometimes, in an unavoidable situation like rushing up yourself to finish your drawing and eventually making it to submission day. This is the time when your drawing presentation might suffer, specially the dimension presentation.

Goodthing, AutoCAD has this routine, that can automatically adjust existing parallel linear and angualr dimension in a drawing, so they are equally spaced or aligned at the dimension line with each other.

(fig.1)

This routine called, the Dimension Space, or DIMSPACE, you can find this routine at the Dimension Pulldown menu, Dimension Space, you can also find it at the dimension toolbar (fig.1). Alternatively, at the command prompt, type DIMSPACE, then ENTER, then select the dimensions you want to adjust. The dimension that to be selected must be linear or angular, of the same type (rotated or aligned), parallel or concentric to one another, and on the extension line of each other. See the example below (fig.2 and fig.3).

(fig.2)

(fig.3)

Random Posts

• Using Baseline Dimension
• Automatic save
• Quickest way of dimensioning an Object
• How not to forget AutoCAD commands
• How to Add Breakline Symbol in Dimension Line

Source: PinoyCAD[dot]net | Your Daily dose of AutoCAD Tutorials – using Dimension Space
Go to Source: PinoyCAD[dot]net | Your Daily dose of AutoCAD Tutorials